TV Console Design in Singapore: Floating, Low and Full-Height Ideas

In most Singapore living rooms the TV console is the largest piece of built-in carpentry outside the kitchen, and it sits on the wall everyone faces. It holds the set-top box, the router, the speakers and the clutter that collects around them, and it decides whether the television looks designed in or parked. This guide covers the three main types of console, how to size one, how to deal with the wiring, which materials hold up, and how to treat the wall behind it.
The Three Types of TV Console
Floating console
A floating console is fixed to the wall with nothing touching the floor. It is the most popular choice in HDB flats and smaller condos because a clear floor makes the room feel larger, a robot vacuum can run underneath, and a strip light along the underside turns it into a soft light source in the evening. The wall has to carry the load, so the fixing and the bracket need to suit the wall it goes on. A floating unit is best kept to drawers and flap doors at a sensible depth rather than deep, heavy storage.
Low console on a plinth or legs
A low console sits on the floor, on a recessed plinth or on legs. It can be deeper and heavier than a floating unit, so it suits households with a lot to store, a large soundbar or a games console collection. On a recessed plinth it still reads as light. On legs it can be freestanding furniture rather than carpentry, which is worth considering if you may move.
Full-height TV wall system
A full-height system runs the whole wall: a low console in the middle, tall cabinets or open shelving on one or both sides, and sometimes a panel across the top. It is the most storage you can build into a living room and it gives the room a finished, architectural look. It is also the biggest carpentry item on the quote, and it can make a small living room feel enclosed if every part of it is closed. Mixing closed cabinets with a few open shelves and a lit niche keeps it from feeling heavy.

Modern Contemporary, at 156 Tampines
How to Size a TV Console
- Width. The console should be wider than the television, so the screen sits over furniture rather than hanging beyond it. Measure the screen you have, and the size you might upgrade to, before the carpenter draws the unit.
- Height. A low console keeps the screen at a comfortable height for viewing from the sofa. Sit down, look ahead, and use that line to place the middle of the screen, rather than setting it by what looks balanced when you are standing.
- Depth. Check the depth against what has to go inside: a set-top box, router, games console or amplifier, with room behind for plugs and cables and a gap for air. A console that is too shallow ends up with doors left open.
- The room around it. Leave a clear walkway between the console and the coffee table, and check that cabinet doors and drawers can open fully without hitting a sofa arm or a column.
Hide the Wiring Before the Carpentry Goes In
Visible cables are the most common complaint about a finished TV wall, and they are cheap to solve at design stage and expensive to solve afterwards. Decide where the screen will be mounted, then plan the power points, the data point and a cable route from the screen down into the console before the electrician and the carpenter start.
There are two ways to do it. A chase cut into a concrete wall hides cables inside the wall, but hacking is noisy work, which HDB allows only on weekdays between 9am and 5pm and which has to be scheduled in the right place in the works. The HDB renovation process guide explains where electrical work sits in that order. The alternative is to run the cables behind a feature panel or inside a slim channel built into the carpentry, which avoids hacking altogether and keeps the cables reachable when you change equipment.
Build in ventilation for anything that runs warm. A closed cabinet with a router and a set-top box needs perforated back panels, a gap at the rear or a grille in the door. A door that passes an infrared remote signal, or a fabric or cane panel, saves leaving it open.
Materials That Hold Up
Material | Where it works | What to know |
|---|---|---|
Laminate | Carcass and doors of most consoles | Hard-wearing and easy to clean, in a huge range of timber, stone and plain finishes. The default for good reason. |
Timber veneer | Doors and visible panels | Real timber on the surface, with grain that laminate cannot fully copy. Needs more care against scratches and sun. |
Fluted or slatted panels | Doors, or the wall behind the screen | Adds texture and hides the lines of doors. Collects dust in the grooves, so choose a profile you can wipe. |
Stone or sintered stone top | The console top or a full slab wall | Durable and visually heavy. Check the weight against a floating design before committing. |
Fluted or reeded glass | Doors of a display cabinet beside the console | Shows a soft outline of what is inside, so it suits display, not clutter. |
For more on the panel and glass options, see our guide to fluted glass, and for stone surfaces, sintered stone in Singapore. The carcass and door materials are the same as in a kitchen, which the kitchen cabinet guide compares in more detail.

Modern Luxury, at Bellewaters
Designing the TV Feature Wall
The wall behind the console is the natural feature wall in most living rooms, so it is worth designing the two together. The options run from paint to full cladding:
- Limewash or textured paint. The lightest touch and the easiest to change later.
- Fluted or slatted panels. The most requested treatment behind a television. Panels also give you a cavity to run cables through.
- Stone-look slab. A single marble-look panel behind the screen, for a more formal room.
- A shallow cove or backlight. A strip of light above the panel or behind the screen softens the contrast of a bright screen against a dark wall in the evening. Our cove lighting guide covers where it works.
More treatments, and which wall in the room to choose in the first place, are in our feature wall ideas.
Common Mistakes
- Designing the console before choosing the screen. The screen size decides the width, the mounting height and where the cables run.
- Too few power points. Count every device, including the ones you plan to add, and put the points inside the console, not behind it where they are hard to reach.
- All closed storage on a small wall. A wall of doors looks heavy. Leave some open space or a lit niche.
- Glossy finishes opposite a window. High gloss reflects the window onto the screen. Matt or satin finishes cut the glare.
- No access for later. Routers and set-top boxes get replaced. Make sure the cable route can be reached without taking the console apart.
Getting It Right the First Time
A TV console is one of the items worth seeing in 3D before it is built, because its proportions against the sofa, the window and the ceiling are hard to judge from a plan. Ask your designer for a render of the whole wall, with the screen in it at the size you will buy. To see how we have handled the living room in HDB flats, browse our HDB interior design work, or book a free consultation and bring the measurements of your living room.
Planning a renovation?
See the homes we have designed, how we work, and what our clients say, for your type of home.
4.9 on Google ReviewsCaseTrust certifiedFree first consultation
Free guide from Ace’s Design
The AI Render Reality Check
Nine questions to ask before you build what the picture shows, with a checklist you can mark Answered, Not sure or Problem.
Leave your details and we will email you the PDF.
