HDB Service Yard Design: Laundry, Storage and Layout Ideas

Service yard with walnut cabinetry, a stainless steel sink, washer and dryer

The service yard is the hardest-working corner of an HDB flat. It holds the washing machine, the drying rack and often the water heater, and it ends up storing everything that has no home elsewhere. It is also one of the easiest places to gain function in a renovation, because a few well-planned cabinets and the right appliances turn it into a proper laundry. This guide covers the layouts, the storage, the drying options and the HDB rules that apply.

What a Service Yard Has to Do

  • Washing. A washing machine, and often a dryer.
  • Drying. A ceiling-mounted rack or a pole system at the window.
  • Utility. A utility sink for soaking and cleaning, and sometimes the water heater and gas meter.
  • Storage. Detergents, cleaning tools, the vacuum, the ironing board and bulk household supplies.

Layout Ideas

Stacked washer and dryer

Stacking the dryer on top of the washer frees floor and counter space in a narrow yard. Build the stack into a tall cabinet with a pull-out shelf between them for folding, and leave space behind for the hoses and ventilation.

Side by side under a counter

Where the yard is wide enough, front-loading machines side by side under a worktop give a folding surface above and cabinets overhead. A utility sink at one end completes a proper laundry.

Full-height storage

A tall cabinet for the vacuum, mop, ironing board and step ladder clears the floor. Cabinets above the machines hold detergents. Use moisture-resistant board and sealed edges, as in a kitchen, because the yard is damp.

Kitchen in blush with a brass rail, stone splashback and a glazed door to the yard

Urban Contemporary, at 317A Tengah

Drying Clothes

A ceiling-mounted drying hanger in the kitchen or service yard needs no HDB permit, but its screws, nails and bolts must not exceed 6mm in diameter and 40mm in penetration depth. A dryer, or a dehumidifier in a closed yard, helps in wet weather.

Combining the Yard With the Kitchen

In many flats the yard opens off the kitchen, and the two can be planned as one space. HDB allows the kitchen to be extended into the service yard without removing walls and without a permit, as long as the services in the extended area are not tampered with and no exhaust fan is installed in the yard. A glass door or partition between them keeps the laundry out of sight while keeping the light. How that fits into a kitchen renovation is in our kitchen renovation guide.

HDB Rules for the Service Yard

  • Grilles. Installing or replacing grilles at the service yard needs a permit. For flats handed over from 1 July 2007, the grilles must be of HDB-approved designs, which are in the renovation factsheet given at booking or key collection, and on your MyHDB page. Our window grille guide compares the options.
  • Windows. For flats handed over from 1 July 2007, replacement windows at the service yard need only be of a similar colour scheme to HDB’s originals. Window works must be done by a BCA-approved window contractor.
  • Gas. Where the gas riser runs through the yard, it must not be tampered with. It can be boxed in only with lightweight non-combustible material and a fully ventilated removable access panel 600mm wide and full height. Gas work must be done by City Energy or a Licensed Gas Service Worker.
  • Piping. Service ducts and pipes can be enclosed with lightweight non-combustible material, with a removable access opening of at least 600mm by 600mm.

Small Flats: Making the Yard Count

In a smaller flat the yard often has to take storage the rest of the home cannot. In a BTO 2-room Flexi or a 3-room BTO layout, a full-height cabinet in the yard can hold what would otherwise need a store room. More ideas for every flat type are in our HDB decor and design ideas.

Service Yard Checklist

  1. Measure the yard and the machines, including door swing and hoses.
  2. Decide stacked or side by side before the carpentry is drawn.
  3. Plan power points and a water point for each appliance.
  4. Choose the drying method and fix the rack with HDB-compliant fixings.
  5. Use moisture-resistant cabinets with sealed edges.
  6. Check your precinct factsheet before changing grilles or windows.
  7. Leave access to gas risers, pipes and meters.

If you are collecting the keys to a new flat, our BTO key collection checklist covers the rest of the flat, and our vinyl flooring guide explains why the yard should stay tiled. To plan the yard with the kitchen, book a free consultation.

Renovating an HDB flat?

See the HDB homes we have designed, how we work within HDB’s rules, and what our clients say.

4.9 on Google ReviewsCaseTrust certifiedFree first consultation

Free guide from Ace’s Design

BTO Key Collection to Move-In

The nine stages from key collection to move-in, who is involved at each, and a timeline worksheet to fill in with your own dates.

Leave your details and we will email you the PDF.