Window Grilles in Singapore: Invisible Grilles, Traditional Designs and the Rules

Toy poodle sitting on a window seat behind sheer curtains

Window grilles are one of the first things new home owners in Singapore add, usually for the safety of young children or pets in a high-rise flat. The choice used to be simple. Now most households compare traditional grilles with invisible grilles, and the decision is as much about the view and the look of the room as about safety. This guide compares the two, lists what to ask before you buy, and sets out the rules to check first.

Why Install Window Grilles

  • Safety. The main reason. A grille adds a barrier at an open window in a home with young children, elderly family members or pets.
  • Security. Mainly for ground-floor and low-floor units, and for windows facing a common corridor.
  • Ventilation. A grilled window can be left open with more peace of mind when no one is in the room.

A grille is not a replacement for supervision or for keeping beds, sofas and storage away from windows, which is what most children climb. Plan the furniture layout with the windows in mind.

Invisible Grilles vs Traditional Grilles

An invisible grille is a row of thin stainless steel cables held under tension between tracks fixed to the window frame or opening. From inside the room the cables almost disappear, so the view and the light stay as they were. A traditional grille is a frame of solid bars, usually aluminium or steel, in a fixed pattern.

Feature

Invisible grilles

Traditional grilles

View and light

Barely visible from inside

Bars are part of the view

Look

Clean, suits modern interiors

Depends on the design; can look dated

Strength

Depends on cable, tension and fixing

Rigid frame

Upkeep

Cables should be checked for tension

Steel can rust if the coating fails

Security

Designed mainly for fall prevention

Stronger deterrent on low floors

For most high-floor flats, where the concern is falls rather than intruders, invisible grilles are now the common choice. On low floors or along a corridor, a traditional grille or a gate still does more for security.

Window with venetian blinds above a pale worktop and a curved bench

Modern Contemporary, at 156 Tampines

What to Ask Before You Buy

  1. Cable spacing. Ask what gap the installer will leave between cables, and choose it with your youngest child or smallest pet in mind.
  2. Materials. Ask which grade of stainless steel the cables are, what the tracks are made of, and whether the cables have a coating.
  3. Fixing. Ask what the tracks are fixed into and with what. A grille is only as strong as its fixing, and it should not stress the window frame.
  4. Tension and checks. Ask how the cables are tensioned, how often they should be checked, and whether checks are included.
  5. Warranty. Get the warranty in writing, with what it covers and for how long.
  6. Access. Make sure the grilles still let you open and clean the windows, and reach the air-con ledge if the technician needs it.

Window Grille Design

If you choose a traditional grille, the design matters because you will look at it every day. Simple horizontal or vertical bars in a colour close to the window frame look the tidiest. Busy patterns and contrasting colours draw the eye to the grille instead of the view. Inside the room, sheer curtains or blinds soften either type. Where a bay window or a ledge sits in front of the window, the grille position affects how that space can be used, which our bay window guide covers.

HDB Rules to Check First

HDB’s rules on windows and grilles are published in its renovation guidelines, and a few points are worth knowing before you speak to an installer:

  • Window works are for approved contractors. HDB requires all window installation and replacement to be done by a Building and Construction Authority (BCA) approved window contractor listed in its directory.
  • Full-height windows stay. HDB does not allow full-height windows, including three-quarter height and bay windows, to be replaced, except where a damaged frame needs a complete replacement.
  • Grille designs. For flats handed over from July 2007, window grilles must follow HDB-approved designs. Changes to grille design are among the works that need approval, as set out in our HDB permit guide.
  • Your precinct may have its own rules. Some estates have additional guidelines to protect their facade. HDB’s factsheet for Punggol Waves, for example, allows external grilles at the service yard only in the designs in its appendix, and does not allow external grilles at air-con ledges. Check whether your precinct has one.
  • You are responsible for your windows. HDB makes flat owners and occupants responsible for the upkeep of the windows in their flat, and a grille installation should never weaken a window.

Laundry layouts, storage and the other rules for that space are in our HDB service yard design guide.

Rules are updated, so confirm the current position on HDB’s renovation guidelines page or with your contractor before buying. If you are collecting the keys to a new flat, our BTO key collection checklist covers the other rules to read at that stage.

Condo Owners: Check With Your MCST

In a condominium, anything that changes the outside appearance of the building is a matter for the management corporation (MCST). Most condos have by-laws or guidelines on grilles, including the designs, colours and positions allowed. Ask the management office for them before you get quotes, and get any approval in writing.

When to Install

In a new flat, grilles usually go in early, before the household moves in, so the windows are safe from the first day. Coordinate the date with the rest of the renovation, so the installer is not working around carpentry or fresh paint. The order of works is set out in our HDB renovation process guide. If you would like grilles included in your renovation plan, talk to us.

Planning a renovation?

See the homes we have designed, how we work, and what our clients say, for your type of home.

4.9 on Google ReviewsCaseTrust certifiedFree first consultation

Free guide from Ace’s Design

BTO Key Collection to Move-In

The nine stages from key collection to move-in, who is involved at each, and a timeline worksheet to fill in with your own dates.

Leave your details and we will email you the PDF.